124-50 CONDUCTIVE INK導電油墨

說明：124-50是一種導電油墨/涂料，用于絲網印刷、浸漬和

注射器分配。該產品與聚碳酸酯、卡普頓、聚酯薄膜、玻璃和各種

其他基質。與傳統的導電材料不同，這種產品非常耐磨、耐刮擦，

屈伸。124-50的一些應用包括但不限于聚酰亞胺的emi/rfi屏蔽

柔性電路、聚合物厚膜電路和薄膜開關。

典型特性：

粘度（cps）20000

填充碳

抗皺性佳

大體積電阻（Ω-cm）0.1

片電阻率（Ω/平方/mil）40

水解穩定性優異

有效溫度范圍（攝氏度）-55至200

建議的處理和固化：124-50已準備好可供使用?？梢赃M(jìn)一步細化

加入少量的cmi 120-08稀釋劑。使用前，一定要充分?jǐn)嚢?，重新懸浮填料?/p>

在大多數應用中，在125°C下固化3-5分鐘可獲得優異的性能

通過在50°C至175°C的溫度下固化在多種基材上獲得。建議終用戶

通過實驗確定適合個人應用的溫度和時間。

如果儲存在冷凍室中，在打開之前讓容器達到室溫，以防止形成任何水分

在產品表面。

貯存期：25℃下保存2個月；5℃下保存6個月；或-10℃下保存12個月。

安全和操作：在通風良好的情況下使用。遠離火花和明火。避免

長時間接觸皮膚和吸入蒸汽。用肥皂和水清洗皮膚。

124-50 CONDUCTIVE INK導電油墨

124-50
CONDUCTIVE INK
DESCRIPTION: 124-50 is an electrically conductive ink/coating for application by screen-printing, dipping and
syringe dispensing. The product features excellent adhesion to Polycarbonate, Kapton, Mylar, glass and a variety
of other substrates. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching,
flexing and creasing. Some applications for 124-50 include, but are not limited to, emi/rfi shielding of polyimide
flexible circuits, polymer thick film circuitry, and membrane switches.
TYPICAL PROPERTIES:
Viscosity (cps) 20,000
Filler Carbon
Crease Resistance Excellent
Volume Resistance, max. (Ω-cm) 0.1
Sheet Resistivity (Ω/square/mil) 40
Hydrolytic Stability Excellent
Useful Temperature Range (°C) -55 to 200

SUGGESTED HANDLING & CURING: 124-50 is ready to use as supplied. Further thinning may be accomplished
by adding small amounts of CMI 120-08 thinner . Prior to use, be certain to mix well to re-suspend fillers. Best
properties, for most applications, result when cured for 3 to 5 minutes at 125°C. Excellent properties are also
obtained on a variety of substrates by curing at temperatures ranging from 50°C to 175°C. End user is advised to
experimentally determine temperature and time best suited for individual applications.
If stored in freezer, allow container to reach room temperature before opening to prevent any moisture from forming
on product surface.
STORAGE: Shelf life: 2 months at 25°C; or 6 months at 5°C; or 12 months at -10°C.
SAFETY & HANDLING: Use with adequate ventilation. Keep away from sparks and open flames. Avoid
prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.