GPC 251導電環氧膠粘劑

說明：GPC 251是一種由兩部分組成的室溫固化銀填充環氧膠粘劑。這個系統是

設計用于在電氣部件和裝置上制作電氣和機械附件。不像典型的

室溫固化系統，本產品具有優異的導電性，對

操作和環境條件。免費的B組件允許定制終屬性，使用

B2612為了更高的靈活性和更低的應力，使用標準的B部件以獲得高強度的要求。

GPC-251A/B GPC-251A/B2612

外觀：銀白色

稠度：糊狀

配合比（按重量計）：100/5.9（17/1）100/100（1/1）

適用期：60分鐘60分鐘

典型固化特性：

體積電阻率（25°C）0.005Ω-cm 0.005Ω-cm

體積電阻率（120°C）0.0002Ω-cm 0.0002Ω-cm

拉伸剪切（psi）>1800>1200

吸水率（%）<0.06<0.07

抗拉強度（psi）11200 8800

耐溶劑性優異

可焊否

比重2.7 3.16

導熱系數（W/M-K）6.74 7.81

混合說明：在加入固化劑之前，在原容器中預混料A部分。將B部分添加到A部分

攪拌均勻。

固化說明：當產品按照以下時間表之一固化時，可獲得效果：

25°C下24小時，或

65°C時60分鐘，或

95°C時30分鐘，或

120°C時5分鐘

建議終用戶通過實驗確定適合個人應用的溫度和時間。

儲存：A和B部分保質期：12個月，25°C，未開封，未混合容器。

GPC 251導電環氧膠粘劑

 GPC 251
ELECTRICALLY CONDUCTIVE EPOXY ADHESIVE
DESCRIPTION: GPC 251 is a two-part, room temperature curing, silver filled epoxy adhesive. This system is
designed for making electrical and mechanical attachments on electrical components and devices. Unlike typical
room temperature curing systems, this product always results in excellent conductivity and is less sensitive to
handling and ambient conditions. Complimentary B components allow for customization of end properties, use
B2612 for more flexibility and lower stress, use the standard B component for high strength requirements.
GPC-251A/B GPC-251A/B2612
Appearance: Silver Silver
Consistency: Paste Paste
Mix Ratio (by weight): 100 / 5.9 (17 / 1) 100 / 100 (1 / 1)
Pot Life: 60 minutes 60 minutes
TYPICAL CURED PROPERTIES:
 Volume Resistivity, max. (25°C) 0.005 ?-cm 0.005 Ω-cm
Volume Resistivity, max. (120°C) 0.0002 ?-cm 0.0002 Ω-cm
 Tensile Shear (psi) >1,800 >1,200
 Water Absorption (%) <0.06 <0.07
 Tensile Strength (psi) 11,200 8,800
 Solvent Resistance Excellent Excellent
 Solderable No No
 Specific Gravity 2.7 3.16
Thermal Conductivity (W/m-K) 6.74 7.81
MIXING INSTRUCTIONS: Premix Part A in original container prior to adding curing agent. Add Part B to Part A
and mix until uniform.
CURING INSTRUCTIONS: Best results are obtained when product is cured at one of the following schedules:
 24 hours @ 25°C, or
 60 mins @ 65°C, or
 30 mins @ 95°C, or
 5 mins @ 120°C
End user is advised to experimentally determine temperature and time best suited for individual applications.
STORAGE: Shelf life Parts A and B: 12 months at 25°C in unopened, unmixed containers.