127-15(SD)注射器用導熱環氧模貼膠

說明：127-15（SD）是一種注射器，可有可無，導熱，電絕緣，單組分，

100%固體環氧粘合劑。該系統具有優異的熱穩定性、優異的耐化學性和

優異的高溫性能。應用包括與鍍金基板和錫/鉛焊料的粘合

端接元件、模具連接和熱管理操作、印刷電路板制造、高級

材料復合，密封和高性能涂層。

屬性：

粘度（cps）100000

填料氮化鋁

填料百分比60

大體積電阻率（Ω-cm）1 x 1016

熱導率（w/mk）5.5

介電常數（1kHz）4.1

介電常數（1MHz）3.9

損耗因子（1kHz）0.027

損耗因子（1MHz）0.038

有效溫度范圍（℃）-55至+230

熱穩定性（℃）良好至+325

搭接剪切強度（psi）>1800

玻璃化轉變溫度，tg（℃）105

離子含量

氯化物<10 ppm。

鈉<10 ppm。

鉀<10 ppm。

（典型特性不用作規范限值。）

建議的處理和固化：材料在收到后即可使用。存儲凍結以保持*

流動特性。打開容器前，讓材料預熱至室溫。使用前混合

如果包裝在容器中，容器應重新懸掛填料。在155℃下固化30分鐘，或在

175攝氏度。

貯存期：25°C下保存2周；或-10°C下保存6個月；或-40°C下保存12個月。

安全和操作：在通風良好的情況下使用。遠離火花和明火。避免

長時間接觸皮膚和吸入蒸汽。用肥皂和水清洗皮膚。

127-15(SD)注射器用導熱環氧模貼膠

 DESCRIPTION: 127-15(SD) is a syringe dispensable, thermally conductive, electrically insulating, one component,
100% solids epoxy adhesive. This system features excellent thermal stability, outstanding chemical resistance and
excellent high temperature properties. Applications include adhesion to gold plated substrates and tin/lead solder
terminated components, die attach and thermal management operations, printed circuit board fabrication, advanced
material composites, sealing and high performance coatings.
PROPERTIES:
Viscosity (cps) 100,000
Filler Aluminum Nitride
Percent Filler 60
 Volume Resistivity, max. (Ω-cm) 1 X 1016
Thermal Conductivity (W/mK) 5.5
Dielectric Constant (1KHz) 4.1
Dielectric Constant (1MHz) 3.9
Dissipation Factor (1KHz) 0.027
Dissipation Factor (1MHz) 0.038
Useful Temperature Range (°C) -55 to +230
 Thermal Stability (°C) Good to +325
Lap Shear Strength (psi) > 1,800
Glass Transition Temperature, Tg (°C) 105
IONIC CONTENT
Chloride <10 ppm.
Sodium <10 ppm.
Potassium <10 ppm.
(Typical properties are not intended to be used as specification limits.)
SUGGESTED HANDLING AND CURING: Material is ready to use as received. Store frozen to maintain consistent
flow properties. Allow material to warm up to room temperature before opening container. Prior to using, mix
container well to re-suspend filler if packaged in containers. Cure for 30 minutes at 155°C, or for 20 minutes at
175°C.
STORAGE: Shelf Life: 2 weeks at 25°C; or 6 months at –10°C; or 12 months at –40°C.
SAFETY AND HANDLING: Use with adequate ventilation. Keep away from sparks and open flames. Avoid
prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.