These items can either be sold seperay or as a set.

Upper specimen holder
Replaent Upper specimen holder that holds the upper specimen, which is normally a 6.0mm diameter ball. The upper specimen is held in place by a small grub screw.

Lower specimen holder
Replaent Lower specimen holder that holds the lower specimen, which is normally a 10mm diameter disc held in a recess in the specimen holder. The lower specimen is retained by two button headed socket screws. The specimen holder is clamped to the heater block by two socket head cap screws. An angled hole in the left side of the specimen holder provides location for the main RTD used to measure the lower specimen temperature. The capacity of the lower specimen holder is approximay 5ml of fluid.

Part codes
Item Part code  
Upper and Lower specimen holders  HFRULSH 
Upper specimen holder only  HFRUSH 
Lower specimen holder only  HFRLSH 

柴油潤滑性標準消耗品包 部件號：HFRRSSP  進口
柴油潤滑性溫度傳感器 部件號：HFRRMRTD  進口
柴油潤滑性溫濕度傳感器 部件號：HFRRHUM  進口
柴油潤滑性實驗片下夾具 部件號：HFRRLSH  進口
柴油潤滑性實驗片上夾具 部件號：HFRRUSH  進口
柴油潤滑性砝碼掛繩 部件號：HFRRWHC  進口